| Customization: | Available |
|---|---|
| Certification: | CE, ISO |
| Pulley Sizes: | Type F |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Drive pulley
The driving drum is the main component of transmitting power.
Dt-ii drive drum according to the load capacity is divided into light, medium and heavy three types, drum diameter of 500, 630, 800, 1000mm. with
A roller has several different shaft diameters and center spans for selection.
1) Light: bearing aperture is 80 ~ 100mm, shaft and wheel hub are single key connection, drum is a single plate welded structure, one-way shaft.
2) Medium: bearing aperture is 120 ~ 180mm, shaft and hub are single key connection, there are two kinds of one-way and two-way exit shaft
3) Heavy duty: bearing aperture is 200 ~ 220mm, expansion sleeve connection is cast welding cylinder structure.
The surface of the roller is covered with smooth steel, herringbone and diamond pattern rubber. Herringbone pattern rubber surface friction number, good drainage, but directional,
When installing the herringbone tip should be consistent with the conveyor belt running direction. The conveyor running in both directions should use a diamond pattern. For important occasions, be sure to Coated with vulcanized rubber; For flame-retardant, flameproof occasions should be used corresponding explosion-proof. Bearing seats are all lubricated with oil cup grease.
Product parameters:
| Belt width (mm) |
Pulley diameter (mm) |
Transfer torque (KN.M) |
Withstand the resultant force(KN) |
| 400 | 400 | 2.0 | 40 |
| 500 | 500 | 2.7 | 49 |
| 650 | 500-630 | 3.5-7.3 | 40-80 |
| 800 | 500-800 | 4.1-32(2X23) | 40-160 |
| 1000 | 630-1000 | 4.6-52(2X42) | 40-330 |
| 1200 | 630-1250 | 12-120(2X60) | 52-540 |
| 1400 | 800-1400 | 20-140(2X110) | 100-880 |
| 1600 | 800-1600 | 50-180(2X160) | 260-1140 |
| 1800 | 800-1800 | 60-180(2X180) | 400-1280 |
| 2000 | 1000-1800 | 65-220(2X200) | 600-1420 |
| 2200 | 1000-1800 | 65-220(2X200) | 620-1500 |
| 2400 | 1000-1800 | 65-220(2X200) | 620-1500 |
| Note: special specification of supply and demand both sides can be coordinated. | |||
Bend pulley
It is used to change the running direction of the conveyor belt or increase the wrapping Angle of the conveyor belt on the transmission drum, and its structural form is divided into light, medium and heavy
Three types, the shaft of the grade diameter of 50 ~ 100mm,120 ~ 180mm and 200 ~ 260mm, the surface of the drum has bare light
Steel surface and smooth rubber surface two.
Drive device: by motor, reducer, high speed shaft coupling or hydraulic coupling, brake, low speed shaft coupling and backstop composed of drive single
The yuan is fixed on the drive frame, and the drive frame is fixed on the foundation.
Product parameters:
| Belt width(mm) | Pulley diameter(mm) | To withstand the resultant force(KN) |
| 400 | 250-400 | 6-40 |
| 500 | 250-500 | 6-49 |
| 650 | 250-630 | 6-70 |
| 800 | 250-1000 | 6-330 |
| 1000 | 250-1000 | 6-430 |
| 1200 | 250-1400 | 6-650 |
| 1400 | 315-1400 | 17-980 |
| 1600 | 630-1600 | 200-1280 |
| 1800 | 630-1600 | 200-1440 |
| 2000 | 630-1800 | 250-1600 |
| 2200 | 630-1800 | 280-1760 |
| 2400 | 630-1800 | 300-1760 |
| Note: special specification of supply and demand both sides can be coordinated. | ||
Drive pulley and Bend pulley
(1) The roller should check the grease in the bearing seat before installation to ensure that the bearing is filled with lithium grease and the bearing seat is filled with grease
The amount 2/3 of the empty fat volume.
(2) When the transmission drum is a chevron groove surface, pay attention to the direction of the groove should be consistent with the running direction of the conveyor belt to prevent transmission
The conveyor runs off, and is conducive to trench drainage and sewage.
(3) Necessary protective measures shall be taken in the hoisting process, and the rubber surface of the roller shall not be damaged.
(4) During installation, the roller can be adjusted by adding gaskets under the cylinder bearing seat and adjusting screws on the frame
The cylinder position ensures that the axis and center first conform to the formula range listed in Table 14.
Hengshui Xinrisheng Intelligent Conveying System Co.,Ltd (abbreviated as Xinrisheng Intelligent) is the High-end Conveying Equipment brand , with excellent technical team and in house intellectual property & national patents,developing intelligent conveying machinery. Focusing on transforming itself into international competitive one-station solution provider of intelligent conveying system, providing not only intelligent products but also whole cycle management from construction to operation & service for our customers.Our company located in Hengshui city in North China Plain, it's the cross road of Beijing,Tianjin and Hebei. We have more than 800 units advanced manufacturing equipments, including 20 large and main units and three automatic production lines. The factory covers 253,000 square meters. It's registered capital is 71,550,00 USD, There are more than 300 employees which contains 30 with middle-level titles and 125 technical workers with high technical skills. Xinriseng is mainly engaged in the manufacture, sales and technical services of belt conveyors, large angle belt conveyors, horizontal curved belt conveyors and long distance crossing conveyors. Our products can be used in metallurgy, building materials, electric power, coal, port and other industries, products have been covered the whole domestic market, and exported to the United States, Germany, France and other EU countries, Australia, Brazil, along the Belt and Road countries, Southeast Asian countries and African emerging markets, totally more than 50 countries, gained the customers' praise.Our company has a number of provincial innovative platforms, relying on the technological radiation, constantly strengthens exchanges and cooperation with scientific research institutes. We have successively formed school-enterprise partnerships with China University of Mining, Tianjin University, Beijing Materials Handling Research Institute, Xi'an University of Architecture and Technology, keeping the conveyor design at the leading level in China. At the same time, our technical team regularly carries out technical exchanges and discussions with foreign companies, learning international leading design concepts and process methods, and keeps pace with international new technologies.With the innovative technology, good quality, Xinrisheng has established a one-stop service system. We will continue adhering to "servingthe users, making contributions to society", make our company a flagship of conveying industry with international competitiveness. All in all, our company will provide the best products with high quality and competitive price for our customers and share success with you together.
){kind=link}