| Type: | EP100 |
|---|---|
| Material: | Rubber |
| Inside Material: | Cotton |
| Feature: | Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant |
| Tensile Strength: | Strong |
| Standards: | DIN, BS, ISO, Rma |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier The company's rubber conveyor belt series products include Cotton belt, Nylon (NN) belt,Polyester (EP) belt ,Large inclination (wavy sidewall) conveyor belt, Skirt baffle belt, Annular belt, Pattern belt ( herringbone, figure-eight, fishbone,U-shaped,cylindrical, pockmarked pattern conveyor belt, etc., or designed according to user requirements); and can provide various special properties (flame retardant, heat-resistant, acid-resistant, alkali-resistant, cold-resistant,high-temperature) conveyor belt. 
General Multi Ply Fabric Covnveyor Belts:
| Application in all areas of material handling: Feeding conveyors, overland belt conveyors, loading and unloading conveyors, take-off conveyors, silo conveyors. |
| The carcass construction is for long life in all industrial applications. |
| In the majority of cases are the best solution as far the cost efficiency is concerned. |
NN(Nylon/Nylon) Conveyor Belt
| Ply Thickness (mm/p) |
Strength Series | Cover Thickness | Width (mm) |
|||||
| 2ply | 3ply | 4ply | 5ply | 6ply | Upper | Lower | ||
| 0.75 | 200 | 300 | 400 | 500 | 600 | 1.5-8 | 0-4.5 | 400-4000 |
| 0.8 | 300 | 450 | 600 | 750 | 900 | |||
| 0.9 | 400 | 600 | 800 | 1000 | 1200 | 500-4000 | ||
| 1.15 | 500 | 750 | 1000 | 1250 | 1500 | |||
| 1.25 | 900 | 1200 | 1500 | 1800 | ||||
| 1.45 | 1600 | 2000 | 2400 | 800-4000 | ||||
| 1.55 | 2000 | 2500 | 3000 | |||||
| Cover Properties of the belts: | Adhesion and elongation of the belt: | ||||||||||
| Cover Grade | Tensile Strength ≥ | Elongation ≥ | Abrasion ≥ | Change Rate of tensile strength and elongation after aging % | Belt Carcass | Adhesive Strength | Elongation | ||||
| Mpa | kgf/cm2 | Between plies N/MM | Between rubber and carcass | Longitudinal elongation at break% ≥ | Longitudinal elongation at load% ≤ | ||||||
| Heavy(H) | 18 | 180 | 400 | 0.7 | Rubber thickness≤1.5mm | Rubber thickness≤1.5mm | Rubber Thickness>1.5mm | ||||
| Medium(M) | 14 | 140 | 350 | 0.8 | Cotton Canvas | NN | ≥4.05 | ≥3.15 | ≥3.50 | 10 | 2 |
| Light(L) | 10 | 100 | 300 | 1 | -30 to 30 | ||||||
| Flame Retardant Technical Data | Flame retardant standards | |||||
| Cover rubber performance | Tensile strength(Mpa) | ≥15 | DESIGNATION | Standard | Characteristics requireds | Brief decription of test,Tests and test method. |
| Elongation at break(%) | ≥350 | K | ISO 340 | Anti-static Electrical conductvity, Flame-resistant with cover | Cover rubber static conductivity mube be≤3x108Ω. Drum friction test ≤325ºC. Spirit burner flame performance. Belt tested with cover. | |
| After ageing(%) 70ºC×168H | Tensile strength change rate±25 | NF EN 20340 | ||||
| Elongation change rate at break ±25 | DIN 22103 | |||||
| Hardness (SHORE A) | 65±5 | DIN EN 20340 | ||||
| Abrasion loss (mm³) | ≤200 | S | ISO 340 | Anti-static Electrical conductvity, Flame-resistant with and without cover | Cover rubber static conductivity mube be≤3x108Ω. Drum friction test ≤325ºC. Spirit burner flame performance. Belt tested with and without cover. | |
| Adhesion | ≥5N/mm | NF EN 20340 | ||||
| Average value of Top/Bottom static conductivity(Ω) | ≤3×108Ω | DIN 22103 | ||||
| Drum friction | The Max.temperature of drum surface(ºC) | ≤325 | DIN EN 20340 | |||
| Flame or glow | no sign of flame, sparks or glow | |||||
| Spirit burner flame performance | With cover rubber:Average ≤3 seconds, individual ≤10 seconds | |||||
| Without rubber cover: average ≤5 seconds, individual ≤15 seconds | ||||||
| Standard | DIN EN, MSHA | |||||
Heat Resistant Conveyor Belts:
Heat resistant conveyor belt with the fabric of high modulus, low shrink and high breaking tensile strength. Heat resistant belt is premium quality SBR rubber compound with very good abrasion resistance and heat resistance to handle hot materials up to 200ºC.
This type belt has high adhesion, less elongation as well as good wearability under normal conditions and against hot materials
Application:Steel mills ( saad metal, sintered ore, coke, pellets, slag, etc.), Cement plants (clinker, cement products, compound raw materials, dry clay, etc.), other (foundry sand, etc.)
Heat resistant cover rubber physical property:
| Cover Types | Standard & Grade | Minimum Tensile Strength(Mpa) | Minimum Elongation at break(%) | Maximum Abrassion(mm³) | Application Characteristics |
|---|---|---|---|---|---|
| Heat Resistant | DIN-T IS-HR(T1) | 15 | 350 | 150 | Suitable for carrying hot loads continuously at temperature up to 120ºC |
| DIN-T IS-HR(T2) | 15 | 350 | 150 | Suitable for carrying hot loads continuously at temperature up to 150ºC | |
| DIN-T (T3) EPDM rubber based | 15 | 300 | 200 | Suitable for carrying hot loads continuously at temperature up to 180ºC |
| Item | Grade | |||
| H | D | L | ||
| Tensile Strength(Mpa) | ≥24 | ≥18 | ≥15 | |
| Elongation at breaking(%) | ≥450 | ≥400 | ≥350 | |
| Aging test(70ºC,7D) | Tensile stength change rate/% | ±25 | ±25 | ±25 |
| Breaking elongation change rate/% | ±25 | ±25 | ±25 | |
| Abrasion loss/mm³ | 120 | 100 | 200 | |
| Cold resistant coefficient at elongate ≥ | C1 | 0.3 | ||
| C2 | 0.2 | |||
| Note: C1:Temperature condition is -45ºC ~ +50ºC,C2:Temperature condition is -60ºC ~ +50ºC | ||||
Step 1: Prodcution Line.
1.Calender process:4 rollers celender machine is able to stick rubber on both side of the fabric in one time.This can reduce the strength loss of the rubber during the process.
2.Forming process:The forming tension is even between different plies,which can avoid wrinkled fabric and guarantee an even thickness of belt core.
Step 2:Laboratory
1.Abrasion resistance [mm³]:The method used to measure abrasion resistance (ISO 4649 / DIN 53516) involves moving a test piece of the rubber across the surface of an abrasive sheet mounted on a revolving drum and is expressed as volume loss in cubic millimeters, for instance, 150 mm³.
2.Thickness:The actual thickness of the carcass largely determines the suitable usage range for the belt.3.Thickness:The actual thickness of the carcass largely determines the suitable usage range for the belt.
3.Rubber compound test:Moving die rheometer analyzes the characteristics of Rubber Compound.
4.Adhesion between the plies:The strength of adhesion (bond) between the various layers of plies and between the plies and the covers is also a standard part of the assessment criteria.
5.Elongation On multi-ply belts:insufficient elongation can lead to shear stresses, which in turn can cause delamination (separation) issues.
6.Tensile strength at break (N/mm):Virtually all industrial conveyor belts are defined by their tensile strength. The carcass absorbs the force when tension is applied to the belt.
We have an inspection team to inspect the surface and dimension of each conveyor belt. If any problem on belt surface, we will repair at once in our factory.(Length and surface&Thickness &Width inspection)
| MACHINE:We have advanced laser cutting machines, a complete set of intelligent sheet metal forming equipment, robot welding and other processing and testing equipment. |
| PAINTING: We use electrostatic spraying to ensure variety, model and quality of coatings, thinners and curing agents should meet the design requirements and the current relevant national standards. The steel surface should be free of welding slag, welding scars, dust, oil, water and burrs before painting. No mispainting or omission, and the coating should be free of peeling and rust. Inspection method: observation and inspection. Uniform brushing, consistent color, no wrinkles,sagging and bubbles, good adhesion, and the color separation line should be clear and neat. |
| DELIVERY:The goods and product factory certificate, installation and use instructions and drawings, a full set of connectors. After the equipment arrives at the site, the company immediately arranges professional and technical personnel to guide the installation on site to provide customers with satisfactory services. |
| PACKAGE:Packed with steel frame or wooden box, according to the standardfor trade export or according to the special requirements of customers. |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}